Filter
Top Products
Divar 700 Series Operating instructions | en 53
Bosch Security Systems Installation and Operation manual F.01U.246.471 | v3.6 | 2011.11
– To change a video segment in the list, select it and click Change.
– To remove a video segment from the list, select it and click Remove.
The archive list is saved until archiving is carried out. Video segments that have been partially
overwritten or deleted from the internal hard drive(s) are removed from the list.
– Place a check mark next to Authenticity check to authenticate the video segments
before archiving.
– Select Start to write the video segments to the destination media.
– Select Stop to cancel the archiving process.
– Select Details for an error report if the authenticity check or archiving is unsuccessful.
If the total size of the video segments is greater than the media’s free space, then only the
first segments that fit are archived. Those segments that are not archived remain in the list so
that they can be archived to new media.
5.7.2 Playback
Figure 5.13 Local playback menu
By default, the unit uses the local disk set to perform playback operations. This panel allows
locally attached devices with archived data to be selected as a source for playback. This
feature allows verification of exported video data locally on the unit.
– Current source shows the device currently selected for playback.
– Select a source file name from the list.
– Select Start Playback to playback from the selected source.
If the selected file is on a DVD or USB source, then the file is first loaded into the unit. When
the file is fully loaded, playback starts and continues to run even if you toggle to the live mode.
While this playback is running no export or event search is available. Switch back to the local
disk set to allow these functions.