Filter
Top Products
66 en | Advanced configuration Divar 700 Series
F.01U.246.471 | v3.6 | 2011.11 Installation and Operation manual Bosch Security Systems
6.1.2 Time/date
Figure 6.2 Configuration menu - International - Time/date
– Select a Time zone from the list (daylight saving time is adjusted accordingly).
– Select either a 12-hour or a 24-hour clock Time format.
– Fill in the actual Time.
– Select a Date format which shows either the month (MM), the day (DD), or the year
(YYYY) first.
– Enter the actual Date.
–Set Daylight Saving to Automatic to enable it. Set to Manual and fill in the day, month,
and time of both Start and End time, and the Offset if it differs from the information
associated with your time zone.
Note:
If synchronizing the time causes the the recorder time to be set back less than 10 minutes, the
recorder clock slows down. The recording continues, but more frames are stored for each
second that the recorder time advances. When the recorder time slow-down has made up for
the number of minutes it was ahead, normal clock pace is resumed.
During playback of video recorded with a slowed-down clock, the playback speed appears to
have slowed down.
If synchronizing the time causes the recorder time to be set back more than ten minutes,
recording is suspended. The recorder clock stops until the actual time has advanced to the
last recording timestamp. An alarm message is shown during this condition until the alarm is
acknowledged. When the recorder time has advanced to the timestamp of the newest