Filter
Top Products
HOW TO OPERATE
Record and Play
22
All recordings will be deleted when JB-199 Premier is powered off or exits to Windows
platform. To save the recordings, set the Recording status to Save in 5. System Setup
under MENU.
42
Any audio source can be connected to the AUDIO IN terminals of JB-199 Premier for recording.
To record a song from JB-199 Premier, connect the AUDIO OUT of JB-199 Premier to the
audio input terminals of an external amplifier. Then connect the audio output (line output)
of the amplifier to the AUDIO IN terminals of JB-199 Premier. See Section: How To Connect.
Click on REC button in Panel G to turn on the Recording mode. A red dot with a pause sign and
Rec indicator will begin blinking on the TV screen, indicating standby to record. Start a song in
JB-199 Premier. The pause sign in the red dot will dissappear, indicating recording in process.
When the song is finished or terminated, the Recording mode will return to the standby.
When a recording is completed, the CLEAR button in Panel G will be enabled. Place the
cursor on the CLEAR button to see the number of currently stored recordings. You can record up
to 99 songs. To delete the recordings, click on REC button to turn off the Recording mode, and
then click on CLEAR button to delete from the last recording.
To playback the recordings, enter song numbers 999xx where xx matches with the recording
numbers. For example, for the first song recorded, enter 99901 and click on PLAY.
To make an Audio CD from the recordings, see 3. Disc Recoding in Chapter: Advanced
Functions for the instruction.
To change the settings of the recording function, see 5. System Control in Chapter: Advanced
Functions for the instruction.
To change the input volume level for recording, see 7. Audio Control in Chapter: Advanced
Functions for the instruction.