Filter
Top Products
Disc Play
20
HOW TO OPERATE
62
From the initial Welcome screen, press JB/CD button to switch from JUKE to DISC
(DISC1/DISC2) mode.
Press OPEN/CLOSE button on the remote control to open the disc drive and insert an
audio CD, CD+G, or Super CD+G disc. Press OPEN/CLOSE button again to close the disc
drive.
In DISC mode, the input field to select a song will be changed to “D1-00” or “s0000”. Enter
the track number of the song you wish to play and press PLAY.
To return to JUKE mode for playing songs in JB-199 Premier, press JB/CD button. The input
field to select a song will change to “00000”.
Note: JB/CD button will not function if no disc drive has been connected to JB-199
Premier. To install a disc drive, see Section: How To Connect.
Do not use the OPEN/CLOSE button on the disc drive itself.