Filter
Top Products
All songs within JB-199 Premier must be registered in order to play properly.
HOW TO OPERATE
Jukebox
1
ADVANCE FUNCTIONS
50
Press MENU button on the remote control or on the front panel to show
the FUNCTIONS window in the TV screen. Use the / buttons to move the cursor
to 1. Jukebox and press to enter. Following menu will appear:
* System ID (xxxxxxxxxxxx)
This is a unique machine ID for JB-199 Premier unit. All songs registered within the unit will
be tagged with this system ID.
* IP Address (xxx.xxx.xxx.xxx)
Indicate the IP Address assigned to JB-199 Premier from the network. This address enables
local LAN (100 Mbps) and Internet communication between JB-199 Premier and a remote PC
using JB-199 Manager program. For instruction, see Chapter: JB-199 Manager Program.
* Juke, FTP Version (xx.xxx)
Indicate the version numbers of the current Juke and FTP program in JB-199 Premier.
* FTP Status (Running / Stop)
Indicate the status of FTP program in JB-199 Premier. Normally, it will show as Running.
* DISK (Total xxxxxx, Free xxxxxx, Total xxxxxx, Free xxxxxx)
Indicate the total and free spaces of the system partition and song data partition in the internal
hard drive of JB-199 Premier.
1. DISC 2 (xxxxx)
Enter by pressing . Input a starting song number for an optional second hard drive.
Songs in the second hard drive (when connected) can then be called by its song number plus
the starting song number. To connect a second hard drive, see Section: How To Connect.
Press to save and exit.
2. Password (On / Off)
Press to enter and select On by pressing . Press to input your password (4 digits). Now
entry to MENU will require the password. Press MENU and “?” will show on the top left
corner of the front panel LCD display. Input the password and the MENU window will open.
To turn off the password, go to 2. Password. Press to enter and input the password.
3. Register Song Files
Press to register all song files in JB-199 Premier. The system ID will be tagged to all song
files inside.