Filter
Top Products
HOW TO OPERATE
Replacing a failed JB-199 Premier hard drive
- When the JB-199 Premier hard drive fails, disconnect the power cord from JB-199 Premier
and open the top cover.
- Disconnect the IDE and power supply cables from the failed JB-199 Premier hard drive.
- Unfasten the failed JB-199 Premier hard drive from its holder and remove.
- For the backup hard drive, be sure to set the PIN setting to be same as that of the removed
JB-199 Premier hard drive.
If the backup hard drive is an external drive (or in an external case), open the case and
take out the internal hard drive from inside.
- Connect the IDE and power supply cables to the backup hard drive.
- Place the backup hard drive in the holder and fasten with screws.
- Close the top cover and connect the power cord of the JB-199 Premier.
- Power on the JB-199 Premier.
82