Filter
Top Products
2. Select File (All / Select)
Choose to write all tracks or some selected tracks only. If some, choose Select and press .
A new window SELECT FILE will appear. Use the / buttons to move along the files
and use button to select or unselect each file. When the selection is complete, press to
return.
1. Select Drive (DISC1 / DISC2)
Press to enter. Select, using / buttons, the disc drive which contains the blank CD-ROM.
HOW TO OPERATE
9. Edit, Save, and Print Song list
To edit, save and print the song list of JB-199 Premier, see Chapter: JB-199 Manager Program.
Press MENU button to show the FUNCTIONS window. Use the / buttons to move to 3.
Disc Recording and press button to enter.
This part describes how to make an Audio CD from the recorded tracks. From the initial
Welcome screen, press JB/CD button to switch from JUKE to DISC (DISC1/DISC2) mode.
Press OPEN/CLOSE button on the remote control to open the disc drive and insert a blank
CD-ROM disc. Press the OPEN/CLOSE button again to close the disc drive.
Do not use the OPEN/CLOSE button on the disc drive itself.
Disc Recording
3
52
5. Delete files
Press to delete the selected files.
4. Write files
Press to record the selected files onto the CD-ROM.
3. Writing speed ( 1 / 2 / ... / 40)
Press to enter. Select a speed for recording. Normally, it is set at 8x.
All songs newly captured in JB-199 Premier must be registered in order to play properly.
See 1. Jukebox in Chapter: Advanced Functions for instruction.