Filter
Top Products
130
7.6 Specifications for Margay
Mechanical
Specification Maximum Minimum Typical Notes
Outside dimensions
Width 43.6" 1107.4 mm
Height 32.5" 825.5 mm
Depth 17.5" 444.5 mm
Weight 68 lbs 30.8 kg
Shipping weight ~85-90 lbs ~38-41 kg
Stacking
Horizontal unlimited
Vertical 4 >10 with support
Orientation 15° Tilt on any axis; inverted tilt, same
Chassis color Black
Ventilation, rear clearance required 0" 0 mm
Large walls must maintain adequate
air exchange.
Screen size (front face)
Diagonal 50" 1270 mm
Width 43.5" 1105 mm
Height 24.5" 622 mm
Mullion <1 mm <0.04"
Serviceable from … front or rear, completely
Controls RS232, RS485, remote IR control
WallNet™ ready? Yes
Electrical and Heat
Specification Maximum Minimum Typical Notes
Video input amplitude
Separate analog 1.4 V p-p 0.35 V p-p 0.7 V p-p 75 ohm termination
Composite analog 5.0 V p-p 0.3 V p-p 75 ohm termination
TTL H and V sync 5.0 V 2.5 V 3.5 V TTL at 330 ohm termination
In / Out connectors
Analog Source1 in and loop out
Analog Source 2 in and loop out
15-pin D-sub female
Standards accepted
DVI Digital Source, DVI transmission std,
in and loop out
DVI out carries any selected input
Optional video module (VIM)
Composite video RCA connectors, in and loop out
S-video 4-pin DIN connectors, in and loop
out
Component YPbPr 3 RCA connectors, in and loop out