Filter
Top Products
2.5 Connections
26
2.5.3 Connections, Power
AC loop-thru means you won’t need as many mains sockets.
Bring in AC power next to the electronics module.
The voltage can be 115 (90V – 132V) or 230 (200V –
254V).
Loop the AC power out to the next Margay, if you
wish, but limit this to four (4) connected Margays for
115V operation and eight (8) connected Margays for
230V operation.
WARNING
Do not exceed the recommended number of
Margays linked in series for AC power or the
current draw will be too great.
The AC switch on each Margay controls that cube
only. Turning off the switch in the first cube does not
cut the AC power to the remaining cubes.
The switch is lit when it is ON and there is AC
power to the Margay.
The AC input is fused with a 10A fuse. If for some
reason the fuse in any Margay blows, all the cubes
downstream from this one will go off.