Filter
Top Products
17
end of the row has shorter side-to-side bolts to
secure just two Margays together.
5. Check straightness of this second row.
6. Continue in this way with the rest of the rows,
checking straightness as you go.
CAUTION
For high walls, over 2 units high, and for all
tilted walls, see the safety instruction below.
Safety with high or tilted walls
Because the Margay is so narrow front to back,
there is a danger of tipping with high walls. Margay
has tie-back points on the rear to prevent this.
Use these tie-backs to secure the Margay wall to a
structural part of the building. Don’t wait until the
wall is finished. Do this as you build the wall up.
If the wall is tilted forward, tie the Margay all the
way up.
The tie-back points are ¼”x20 threaded holes.
Make sure the fronts of the
units are flush with each
other. This will make screen
alignment easier.