Filter
Top Products
76
4.5 Asset Tag and Display Status
The Asset Tag feature allows you to identify each Margay by its serial number or in other ways.
To see the current Asset Tag, press MONITOR.
The Asset Tag is initially blank. You can write in
any short text message using RS232 commands. See
the Margay RS232 Guide, available from Clarity’s
website.
Display Status menu information
• Margay—the name of this product
• 573-2300—the part number for the firmware in
Margays
• Rev—the revision number of the firmware cur-
rently operating in this Margay
• Optical Engine SN—the serial number read from
the optical engine in this Margay
• Asset Tag—a text line you enter (see above)
Clarity recommends you enter the serial number of this
Margay here, unless your facility has a special method of
identifying property.
• PS Fan and Eng Fans—If these fans are not on,
the lamp will not be on, and you wouldn’t be able
to see this menu at all.
• Lamp—same for this item.
• Interlock—If the interlock is Open, the lamp will
not light (unless the interlocks have been
bypassed to service the display).
• Mode ID—the number of the mode (type of sig-
nal) currently set
• HPer—the horizontal period in nanoseconds (ns)
of this signal (picture)
• VLines—the number of vertical lines in the pic-
ture
This number will be larger than the vertical resolution,
because it includes vertical blanking lines that are not visi-
ble.
• Last Fault—the last event that caused that forced
the lamp off, followed by the number of hours and
minutes since that happened, measured in Sys-
tem Hours, not clock time
Open Clarity’s website in your internet browser.
www.ClarityVisual.com
In the top banner, click on LOGIN. This opens a
new window.
Click on the lower, blue LOGIN NOW button for
Consultants and Designers.
The User Name is tech.
The Password is help.
Click OK to open the window with all the manu-
als, utility programs, FRUs and firmware updates.