Clarity WN-5040-720 CRT Television User Manual


 
134
7.7 Regulatory Certifications
Declaration of Conformity
Manufacturer's Name: Clarity Visual Systems
Manufacturer's Address: 27350 SW 95th Avenue, Suite 3038
Wilsonville, OR 97070-7708
declares that the products
Model Numbers: WN-5040-720 (DLP™ projector)
Product Options: All
conforms to the following EU Directives and the standards stated:
Safety: UL60950 - Safety of IT Equipment
Electromagnetic Compatibility Directive 89/336/EEC and amendments
EN 55022/CISPR 22 – Radiate and Conducted Emissions from IT Equipment
EN 50082-1/EN61000-4 – Generic Immunity Standard
Including: EN61000-4-2Electrostatic Discharge
EN61000-4-3Radiated Susceptibility
EN61000-4-4Electrical Fast Transient Burst
EN61000-4-5Surge
EN61000-4-6Conducted Susceptibility
EN610004-11Voltage Dips & Interrupts
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in an installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician.
Note: Any changes or modifications to the display not expressly approved by Clarity Visual could void the user's
authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class A lim-
its of Part 15 of FCC rules.
Other Certifications
UL, CUL, FCC/CISPR 22/85, CE