Filter
Top Products
68
4.1 Selecting a Source
The “source” is the picture coming into the Margay. It may be from a computer, a video, or a DVD
player.
Selecting the source
1. Press
MENU on the remote.
2. Select
PICTURE and press ENTER.
3. Select
SOURCE and press the lEFT ARROW key.
4. Choose the source you want and press
ENTER.
5. Press
MENU again to close all menus.
Selecting a source means choosing an input connec-
tor so you can see the picture coming into that input.
If the source you select is not there, you will see a
Source Absent message on the screen. This usually
means there is no picture coming into that connector,
or the picture is not valid.
This message means Analog 2 is selected now, but
there is no picture coming to that connector.