Filter
Top Products
39
4. Loosen the two mounting nuts on the left side of
the carriage.
5. Loosen the single mounting nut on the right side
of the carriage
6. To move the screen image to the right, move the
carriage to its left (as you face the carriage from
the back of the unit).
7. To move the screen image to the left, move the
carriage to its right.
8. To move the screen image up or down tighten or
loosen the adjustment screws on the both sides of
carriage.
a. To move the screen image down, tighten these
screws (turn the screws clockwise).
b. To move the screen image up, loosen the
screws (turn the screws counter-clockwise).
These adjustments are for large physical movement.
You’ll still need to do fine tuning of the picture position
using the process described in “Aligning the optical
engine” on page 38.
9. After you have moved the image to a more reason-
able position, tighten the three mounting nuts
you loosened earlier.
10. Now fine-tune the image position as described in
“Aligning the optical engine” on page 38.
Loosen these two nuts
Move image up or down by adjusting this screw...
... and this screw
Loosen this nut