Filter
Top Products
Page 113
Control Other Devices with the Remote Controls
VCR Mode Button
You must first set up the remote to control the VCR. See Set Up the Remote to
Control Devices, beginning on page 107. Then, you must press the VCR mode
button to set the remote to VCR mode. The VCR mode button lights for two
seconds to show you’ve set the remote to VCR mode. Make sure you keep the
remote in VCR mode to use the buttons described here.
Note: You can set up the remote to control a second VCR in AUX mode, the
same way it controls the first VCR in VCR mode. See Set Up the Remote to
Control Devices beginning on page 107.
Note: You must set the remote to VCR mode to set it up to control a DVD
player. Once you do this, you must set the remote to VCR mode to control a
DVD player.
TV/Video Button
Use the TV/VIDEO button to switch the VCR between its TV mode and its
VCR mode (see your VCR user’s manual for information).
Power Button
Press the blank POWER button to turn the VCR on or off.
Page Up and Down Arrow Buttons
Use the PAGE UP and DOWN ARROW buttons to change channels on the
VCR.
Note: If you are using the remote control in limited mode, the VCR will not
change channels.
Recall Button
Press the RECALL button to go back to the last VCR channel you used. Press it
again to switch between the last two VCR channels you used.