Filter
Top Products
Page 79
Watching One Program While Recording Another
4. Select the timer or timers you want to delete.
Note: Select All if you want to delete all of your timers.
5. Select
Delete. The timer(s) are deleted.
Watching One Program While Recording Another
Single Mode
While in Single Mode, you can set up the satellite receiver to record programs
while you’re also watching one you’ve already recorded.
1. Press the front panel MODE button to make sure the receiver is in
Single
Mode
. The front panel of the receiver has an indicator that is marked
Single.
Note: If someone is using the TV2 outputs, you will see the following
popup on the nearby TV warning you that you are about to disrupt the use of
the TV2 outputs:
2. Press GUIDE to open the
Program Guide. Find a program you
want to watch now.
3. Press SELECT to watch that program.
4. Press the RECORD button. A message will display asking
whether you want to record the remainder of the program. Select
OK to begin recording now.
Tip: You can use
the Front Panel
Locks to prevent
the Mode from
being changed
accidentally. See
page 97 for
instructions.