Filter
Top Products
Familiarization
Section 4
Digital Satellite Receiver Page 4 - 7
© 2002 EchoStar International Corporation
All rights reserved
4
TO CHANGE THE PIN CODE
This menu page allows you to change the PIN code, you can change:
2.1.4. LOCAL TIME PAGE
This menu page allows you to customize the local time settings. For the correct operation of
the EPG and the timers, it is necessary to set the local time correctly. You can customize:
2.1.5. TV SYSTEM PAGE
This menu page allows you to customize the TV settings used for the receiver, you can
customize:
■ Old password
To type in the factory default or personal PIN code.
■ New password
To type in your new PIN code (numbers only).
■ Verify password
To type in your New password again. Now the
receivers verifies the new password to make sure
that you typed in the new password correctly.
■ Selected time zone
To set the time zone where you are.
■ Year
To set the actual year.
■ Month
To set the actual month.
■ Date
To set the actual date.
■ Day
To set the actual day.
■ Hour
To set the actual time in hours.
■ Minute
To set the actual time in minutes.
■ Press OK to set the time
To confirm the settings you made.
■ Channel
To select the (UHF) TV channel to which the
receiver is connected.
■ CH Frequency
To view the frequency that corresponds with the
selected channel. You can not set this option.
■ System
To set the video format supported by your TV.