Filter
Top Products
Section 6
Maintenance
Page 6 - 6 EchoStar DVR-7000 Viaccess
© 2002 EchoStar International Corporation
All rights reserved
2.9. TO ADD A PID
4. On the RCU, press the OK key again to advance.
5. Enter the required settings.
6. Read the available help text for information.
7. Monitor the signal indicator and make sure that
you have sufficient signal strength and quality.
8. Go to the Search Channels field.
9. On the RCU, press the OK key to advance.
10. Wait for the search to complete:
a. the receiver display shows a moving dot;
b. the search completed popup menu appears.
11. On the RCU:
a. press the OK key to advance;
b. press the white key to end the procedure;
c. press the EXIT key to return to live video.
1. Select a channel of the transponder to which you
want to add a PID.
2. On the RCU, press:
a. the OK key;
b. Select Mode = TV
c. Select List = All Channels
d. Select Group = None
e. Select Sort = None
f. Select Edit = Add PID
3. On the RCU, press the OK key.
4. Select the applicable transponder.
5. On the RCU, press the OK key.