Familiarization
Section 4
Digital Satellite Receiver Page 4 - 11
© 2002 EchoStar International Corporation
All rights reserved
4
2.2.4. USER LNB SETTING
This sub menu allows you to program a LNB that is not listed in the LNB selection list. Note
that the menu page is dynamic which means that it changes with the selections you make.
You can customize:
2.2.5. ABOUT ECHOSTAR
The About EchoStar menu gives all the where-to-contact-Information about EchoStar and the
status information about the receiver. You can view:
■ User’s LNB
To select the first or second user defined LNB.
■ Low Frequency
To enter the low frequency of the user LNB.
■ High Frequency
To enter the high frequency of the user LNB.
■ Polarity Control
To select the device that controls the polarity.
■ Band Control
To set the control signal for high or low band
selection.
■ Ku/C Control
To set the control signal for the Ku/C LNB.
■ Store settings
To confirm the selection and save the settings.
■ Company
This field shows the full name of EchoStar.
■ Address
This field shows the address of EchoStar.
■ S/W version
This field shows the current software version
loaded into the receiver.
■ Boot version
This field shows the current boot version loaded
into the receiver.
■ Web site
This field shows the EchoStar web site where you
can find the latest user and software information.