Filter
Top Products
When Auto Backlight is set to Off, the Backlight option allows the backlighting to be
set manually from 0 to 100%. Press the Down or Up buttons to highlight the Backlight
options and use the volume control knob or press the Down or Up buttons to adjust the
backlighting. The current value is shown above the buttons.
NOTE: When Auto Backlight is set to On, changing the percentage of Backlight does
not affect the amount of backlighting.
LED Backlight lights the ten buttons next to the screen.
Wake on Motion activates the panel from Sleep mode when motion is detected near the
unit.
Use the on-screen buttons to toggle the Auto Backlight, LED Backlight, or Wake on
Motion options between Off and On.
Volume Screen
Click on the Down or Up buttons to highlight one of the adjustable audio features. Use
the Down and Up buttons or the volume control knob to adjust:
Master volume (between 0 and 255) sets the maximum volume for all the other
sound volume settings. For example, if the master volume is set to 200 (approximately
80% of maximum), even when the Line In volume is set to 255 (maximum), it is only
equivalent to 80% of maximum.
Click (between 0 and 255) sets the volume for audible feedback that accompanies
events such as a side button or screen button being pressed.
Sounds (between 0 and 255) sets the volume of audio from any audio file playback.
Line In (between 0 and 255) sets the volume of the audio signal received through the
line in from and Extron MTP transmitter.
TLP 700MV and TLP 700TV • Initial Calibration 12