Filter
Top Products
Using the TouchLink Panel Web Pages
As seen in the previous section, the TLP 700MV and TLP 700TV TouchLink Panels have
default web pages that can be used to read and change the current settings of the panels.
The web pages can be accessed as follows:
1. Open your browser and type the IP address of the TLP 700 unit into the address box.
The browser opens the TouchLink Panel Status page, which is read-only and provides
basic information about the model, date and time, and IP settings.
Figure 12. TLP 700 Status Tab
2. Click on the Configuration tab and select the System Settings page, which
allows the user to modify information about the IP settings and the date and time
settings. These correspond to the Network settings (see page 13) and Time settings
(see page 13) in the on-screen menus.
Figure 13. TLP 700 Conguration Tab: System Settings Page
TLP 700MV and TLP 700TV • Control Software 19