Extron electronic TLP 700MV Universal Remote User Manual


 
Time Screen
Click on the Down or Up buttons to highlight one of the adjustable time settings. Use the
Down and Up buttons or the volume control knob to adjust the Month, Day, Year, Hours,
and Minutes.
NOTE: The Hours value uses the 24 hour clock. For 10 am, set Hours to 10; for 10
pm, set Hours to 22.
Network Screen
Set the IP Address or Subnet Mask by pressing the appropriate button. An on-screen
keypad appears that allows the user to enter digits from 0 through 9 or “.” (dot). In the
event of an error, the user can clear the field.
NOTE: The factory default IP address for the TLP 700MV is 192.168.254.254. The
default subnet mask is 255.255.0.0. Consult with your IT Department to
ensure these addresses are correctly assigned.
Toggle between On and Off to enable or disable Dynamic Host Configuration Protocol
(DHCP). This determines whether the unit has a permanent IP address or has one provided
by the network, when required. The default setting is off.
TLP 700MV and TLP 700TV • Initial Calibration 13