Filter
Top Products
Introduction
This guide describes the function, installation and operation of the TouchLink TLP 700MV
and TLP 700TV panels. The guide also provides information about optional accessories that
are available from Extron for both panels.
Unless otherwise stated, the terms “TLP 700 series” and “TLP 700” refer to both models.
About the TLP 700MV and TLP 700TV
The Extron TLP 700MV is a wall mounted TouchLink panel. The screen displays graphic
objects and text, which are associated with user-defined functions. The touch overlay
allows the user to initiate or activate functions by touching the objects on the screen.
The TLP 700TV comes with a stand that allows it to be placed on a desktop. If the
stand is removed, the unit can be VESA
®
mounted on a wall or furniture, using the
Extron VM 700T kit (part number 70-692-01) or the Extron LPVM-1 kit (part number
60-1099-02).
Both units have ten push buttons (five along each side of the screen) and an encoder knob
that allow common, user-defined functions to be activated and calibrated independently
of the LCD screen. The units can be customized by using a bezel kit to cover the buttons,
the encoder knob, or both.
A motion sensor, light sensor, and a speaker provide auto dimming, sleep mode, and
audible feedback.
The GUI Configurator software allows the user to design the screen layout by selecting
from existing templates or designing entirely new interfaces on their PC and uploading
the completed project to the TouchLink panel. The user can define the graphics and the
functions associated with those graphics, providing versatility and adaptability to the
configuration and control of an A/V system.
TLP 700MV and TLP 700TV • Introduction 1