Filter
Top Products
To prepare the TLP 700TV for wall mounting, using either kit, follow these instructions:
1. Remove the TLP 700TV from its packaging or, if the TLP 700TV has previously been
used as a free-standing, desktop unit, remove all cables to the back of the base.
2. At the bottom, the two plastic cover plates for the stand are held together by a
Phillips head screw near the base. Remove the screw in the recessed slot at the front
of the stand, close to the base.
2
Figure 39. Remove Screw.
3. At the top, the two plastic plates covering the stand are held together by four locking
tabs on the back cover plate fitting into four slots on the front cover plate. Squeeze
the sides of the front plate at the top so that the tabs are no longer seated in the
slots.
3
3
Figure 40. Squeeze Sides of the Back Cover.
TLP 700MV and TLP 700TV • Mounting 42