Filter
Top Products
0150-0193C 36 Calibur DVMR
e
Triplex
1. Rotate the Jog to navigate, and the Shuttle to change the values.
2. To save changes and exit the menu: Select [OK], and then press the Enter button.
3. To exit the menu without making changes: Press the Menu button, or select [CANCEL], then
press the Enter button.
q Main Menu → Record → Record Mode
Use this menu to specify how the unit will handle data overwrite
issues once the hard disk becomes full.
No Overwrite:
• Recording starts at the end of the last recording.
• Recording stops when disk becomes full.
• When the hard disk becomes full, the unit displays an on-screen message indicating that the
device is full and that the archive device has stopped recording. The user must acknowledge the
message by pressing the Enter button.
Write Once:
• Recording starts at the end of the last recording.
• Recording stops when disk becomes full.
• The user is prompted to authorize overwriting old data.
Continuous:
• Recording starts at the end of the last recording.
• Unit overwrites all previously recorded data, overwriting the oldest data first.
• The unit does not stop recording when disk becomes full.
q Main Menu → Record → Disk Maintenance
Use the Jog to select from the following options, then press the
Enter button to begin.
Delete: Delete all data from the hard disk (with the possibility of restoring it).
Undelete: Restore data that has been deleted, but not yet overwritten.
Destroy: Erase all data from the hard disk permanently, without the possibility
of restoring it. Selecting this option brings up a confirmation dialog box.
q Main Menu → Record → Record Lock
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
ADM (Auto Delete Mode)
The ADM feature prevents the unit from displaying or archiving any search
results that are more than thirty days old. This feature may be required by law
in some jurisdictions. If required by local authorities, the ADM feature must
be turned On. Typically this feature is turned Off.
No overwrite
Write once
Continuous
UnDelete
Destroy
Delete
ON
OFF
ON
OFF