Filter
Top Products
0150-0193C 53 Calibur DVMR
e
Triplex
q Main Menu → Communications → RS485
Connect several units to a single keyboard, or vice-versa. Up to
32 units (any combination of multiplexers and keyboards) can be
networked together. Use this menu to specify the units unique network address.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
q Main Menu → Communications → Ethernet Settings
An ethernet connection can be used to connect to the unit from a
PC for viewing of live or recorded images. Use this menu to configure
the Ethernet communications settings. Select from the following:
Ethernet: Select Enable or Disable.
IP Address / Subnet Mask / Gateway: Consult with a qualified
Network Administrator or an MIS professional to configure these settings.
3.18 Front Panel Lock
Use this feature to lock the front panel keypad. While locked,
the only operational key on the front panel is the Menu button.
To unlock the front panel, enter the Installer password and return
to this menu.
Highlight the item you wish to select.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
3.19 Factory Settings
Return To Factory Defaults
Factory Default Password
10 and 16-Channel
8 1 1 1
4-Channel
4 1 1 1
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Factory Default password.
Select OK, then press the Enter button.
The unit will reboot, returning all settings (except the time and date)
to the factory defaults. Due to the large size of the hard disk, the
reboot may take several minutes.
Change Language
Language Password
10 and 16-Channel
5 4 1 5
4-Channel
1 4 1 4
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Language password. Select
OK, then press the Enter button.
A menu will appear displaying the available language selections.
Rotate the Jog to select the desired language.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Network Address
01
Ethernet Settings
[CANCEL] [OK]
Ethernet :
IP Address : 10. 90.253. 22
Subnet Mask: 255.255. 0. 0
Gateway : 10. 90. 0. 1
Enable
Unlock Keyboard
Lock Keyboard