Filter
Top Products
FIRST TIME USE
17
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING S-VIDEO VCR OR LASERDISC PLAYER
1. Connect the cable from the S-VIDEO OUT of the S-VHS VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown
on the Monitor Rear Panel below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the INPUT button, repeatedly till you select AV3 to view the program from the VCR or laserdisc player. The VIDEO label
disappears automatically after approximately four seconds.
5. Press the INPUT button repeatedly till you select the ANTENNA input to return to the previous channel.
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output.
Refer to your VCR operating guide for more information on line input-output connections.
20 18 16 14 12 10 8 642
21
19 17
15 13 11 9
7
5
3 1
VCR or Laserdisc Player
OUTPUT
Back of VCR or
Laserdisc Player
R L V
S-VIDEO