Filter
Top Products
GB9
STB Connections
1)
When setting Antenna Configure to Single:
•
When a user has a single antenna (Hotbird or Astra):
Input a signal source to Tuner A, and input the signal input to Tuner A to
Tuner B using a splitter or loop through.
Recommended Antenna Connections
PVR-8000 has the following antenna settings in order to make the most use of
performances of PVR STB and provide its simplicity during installation and use.
•
Tuner A features Live and Timeshift, and Tuner B features recording.
•
To make the most use of PVR in the current system, input all signals of your antenna
(whether you have a single antenna or two antennas) to Tuner A, and then input the
same signals to Tuner B.
PVR-8000 has two antenna modes according to setting: Single and Dual.
•
Single: Based on Tuner B being recorded, you can switch channels and view at the
same time only when the channel being recorded has the same polarity as
the channel to be viewed. But you can’t view a channel having a different
polarity from the channel being recorded.
•
Dual: Tuner A and Tuner B have the same signal sources. Even during recording,
you can freely switch channels regardless of polarity.
(Hotbird)
PVR-8000 ENG 1/21/03 11:10 PM Page 14