Filter
Top Products
14
REMOTE CONTROL FUNCTIONS
0
Power On: Turns on the player
when it is in Standby mode (the JBL
logo appears on-screen).
1
Repeat: Press to go to the Repeat
menu. You can repeat a title, chapter,
track, programmed playlist or the
entire disc.
2
Playlist: Press this button to
access the playlist on-screen menu.
See page 43 for more information on
programming playlists.
3
Audio: Press to access various
audio languages on a DVD (if the DVD
contains multiple audio streams). This
button may also allow you to access
different audio formats on DVD discs,
such as switching to the linear PCM
or Dolby Digital 5.1 tracks (or other
formats), if they’ve been recorded
on the disc.
4
Eject: Press to open or close the
Disc Drawer
3
.
5
Navigation
K/L
Buttons: Use to
select and execute items or settings.
6
Info: Press for detailed informa-
tion on the disc playing (Video/Audio
bit rate, Movie aspect ratio and oth-
ers). Note that the unit will not react
to any transport button as long as the
info menu is displayed. Press again to
remove information from screen.
7
Navigation ‹
/
› Buttons: Use to
select and execute items or settings.
8
Enter: Use to execute selections
in the menu system or as prompted.
9
Pause: Freezes a picture (with
DVD/VCD) and pauses the playback
signal (CD) when a disc is playing.
Press again for normal playback.
A
Skip/Step (Previous): Press to
go to the beginning of the current
track. Press again quickly to go to
the beginning of the previous track.
When the Pause Button
9
has been
pressed during playback, the picture
reverses frame by frame each time
this button is pressed. The step func-
tion is only available for DVDs, VCDs
and SVCDs.
B
Play: Press this button to begin
playback of the disc (closes the Disc
Drawer
3
first, if it is open).
C
Search/Slow (Reverse): Allows
you to search in reverse through a
disc while it is in Play mode. Each
time you press this button while a
DVD is playing, the search speed
changes as below:
R. SEARCH 2x ➜ R. SEARCH 16x ➜ R.
SEARCH 64x ➜ R. SEARCH 200x ➜ R.
SEARCH 2x
Two fast-search speeds are available
for VCDs, SVCDs and CDs: 4x and 32x.
Fast-search is not available for MP3s
or WMAs.
This button also allows you to play
movies in Slow mode. Each time you
press this button while a DVD is play-
ing, and after pressing the Pause
Button
9
, the slow speed will be
changed as below:
R. SLOW 1/2x ➜ R. SLOW 1/4x ➜ R.
SLOW 1/8x ➜ R. SLOW 1/16x ➜ R.
SLOW 1/2x
Slow-speed playback is not available
for CDs, or for MP3 and WMA discs.
Two slow-play speeds are available
for VCDs and SVCDs: 1/2x and 1/4x.
See page 30 for more information on
fast-search and slow-play.
D
Stop: Stops playing a disc. When
a disc is playing, if you press the Stop
Button
7
D
once, then the Play
Button
5
B
, the disc will resume
play; i.e., it will start from the same
point on the disc where the unit was
stopped. If you press the Stop Button
7
D
twice, then the Play Button
5
B
, the disc will start play from
the beginning. The resume function
is not available for CDs. The resume
function is available after the unit has
been placed in the Standby mode by
pressing the Power On/Off (Standby)
Button 2W and then powered on
again, but only for DVDs.
E
Video Off: Press to turn off video
output for improved performance
from audio-only discs. Press again to
restore video output (see page 39).
F
Display Dimmer: Press to change
the brightness of the front-panel dis-
play or to turn the display off com-
pletely in the following order: FULL
BRIGHTNESS ➜ HALF BRIGHTNESS
➜ OFF ➜ FULL BRIGHTNESS
G
Clear: Press to remove the On-
Screen Banner Display from the
screen.
H
Title: Press this button while a
disc is playing to display the current
title number. Press it again to jump to
the next numbered title on the disc.
Note that this function often remains
active even when the disc’s software
prohibits title jumping using the
Skip/Step (Next) Button
Q
.
I
Numeric Keys: Select numbers
by pressing these buttons.
J
Light: Press to illuminate the but-
tons on the remote control.
K
A-B Repeat: Press to select the
beginning and end of passage A-B,
which will play repeatedly.
L
Zoom: When a DVD, JPEG, VCD
or SVCD disc is playing, press this
button to zoom the picture so that it is
enlarged. There are four steps to the
zoom function, each progressively
larger. Press through each of the
zoom stages to return to a normal pic-
ture. Use the Navigation
⁄
/
¤
/‹/›
Buttons 57 to view different
areas of the enlarged image. Only two
enlargement sizes are available for
VCDs and SVCDs (2x and 4x).
M
Angle: Press to access various
camera angles
on a DVD (if the DVD
contains multiple camera angles).
When a JPEG is being displayed,
pressing the Angle Button w repeat-
edly causes the on-screen image to
rotate clockwise by 90 degrees each
press. If the disc also contains audio
MP3 or WMA files, this portion of the
disc must be deactivated by pressing
the Setup Button T to display the
on-screen menu system. Use the
⁄/¤/‹/› Navigation Buttons fh
to highlight the Audio icon on the left
side of the Player Menu, and press the
Enter Button i to deactivate it.
N
Pic–: When playing a disc con-
taining JPEG still image files, press
this button to view the previous
picture.
O
Pic+: When playing a disc con-
taining JPEG still image files, press
this button to view the next picture.
DVD280 OM 7/12/04 4:41 PM Page 14