Filter
Top Products
38
AUDIO CD PLAYBACK
When playing audio CDs, your DVD
player has the same features as a CD
player, including track skip, repeat
play and programmed playback.
These functions may be programmed
using the Player Menu, as described
on pages 31–34. You may also access
these functions directly using the
remote control.
Selecting a Track
1. During Stop, Resume or Play mode,
enter the track number directly
with the Numeric Keys
I
on the
remote. The track selected will
be played at once.
2. Use the Player Menu to navigate
the disc, as described on pages
31–34. When a track is highlighted,
you may press the Enter Button 8
to play it (see Figure 81).
Figure 81
• In all modes, any track can be
selected directly by entering its
number with the Numeric Keys
I
on the remote.
• You can skip through tracks forward
or backward by pressing the Skip/
Step Next/Prev. Buttons (track skip
X/W) 9)
AQ
.
• In Stop mode, the front display will
show the number of tracks recorded
on a CD (below the Track Indicator
D) and the total time on the disc.
Selecting Time Display
The time display in the front-panel
display or in the on-screen menu sys-
tem can be selected and adjusted:
In the Player Menu, select the Time
setting in the upper portion of the dis-
play. Press the Enter Button 8 to be
prompted at the bottom of the screen
to select from the Track Elapsed Time,
Disc Elapsed time, Track Remaining
Time or Disc Remaining Time. Scroll
from left to right until the desired
option is highlighted, then press the
Enter Button 8 to select it. The
selected format will be displayed to
the right of the Time setting in the
on-screen display, and the time dis-
played on the DVD280’s front panel
will also appear in the selected for-
mat (see Figure 82).
Figure 82
You may set an exact time at which
you wish a track or disc to play. The
disc must be playing. Highlight the
time display to the right of the Time
setting, and press the Enter Button
8 (see Figure 83). Use the Numeric
Keys I to enter the time at which
you wish play to begin. Do not press
any other keys; the DVD280 will auto-
matically play from the specified time.
Figure 83
Repeat Play
With CDs, the DVD280 offers three
Repeat functions that allow you to
take advantage of the capacity of
the unit for unattended playback:
• Repeat All (Disc): Plays the com-
plete disc repeatedly from start to
finish until the disc is manually
stopped. When the Playlist setting
has been set to Programmed Order,
Repeat All will play the complete
programmed playlist, which may or
may not include all tracks on the
disc, depending on how you have
programmed it. See page 43 for
more information on programming
playlists.
• Repeat Track: Repeats the CD track
currently being played until the disc
is manually stopped.
• Repeat A-B: Repeats any selected
portion of the disc until the disc is
manually stopped.
Open the Player Menu by pressing
the Setup Button T to display the
on-screen menus, and then using the
Navigation ‹/› Button h to high-
light the Player Menu, select the
Repeat setting. When the current set-
ting is highlighted, the options of
Repeat Off, Repeat Track and Repeat
All (Disc) will appear at the bottom of
the screen (see Figure 84). Press the
Enter Button 8 to move the cursor
to these options, and scroll left or
right until the desired repeat mode is
highlighted. Press the Enter Button
8 again to select it. To cancel the
repeat mode, select the current set-
ting so that the repeat menu appears
at the bottom of the screen, and then
select the Repeat Off option.
Figure 84
You may also repeat a track or disc by
pressing the Repeat Button b on
the remote. If you do so while the on-
screen menu system is visible, the
DVD280 OM 7/12/04 4:42 PM Page 38