Filter
Top Products
Masterpage:Right-No-Heading
EN 49
Filename [DR-M10AG_AX_AA2_08Recording.fm]
Page 49 April 27, 2004 11:03 am
Record One Programme While
Watching Another
Once recording is in progress, all you need to do is to set the
channel controls on the TV for the station you wish to view.
● The programme selected with the TV’s channel controls
appears on the TV screen while the one selected with the
unit’s CH buttons is recorded on the disc.
Elapsed Recording Time and Disc
Remaining Time Indication
During recording, press DISPLAY repeatedly until the
desired indication appears on the front display panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ]
(Back to the beginning)
Receiving Stereo and Bilingual
Programmes
Your unit is equipped with a Sound-Multiplex decoder (A2) and
a Digital stereo sound decoder (NICAM) making reception of
stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
NOTES:
● “SUPERIMPOSE” must be set to “AUTO”. Otherwise the
on-screen displays will not appear. (
੬ pg. 90)
● If the quality of stereo sound being received is poor, the
broadcast might be received in monaural with better quality.
Selection of the audio channel to be
recorded on a disc
When a programme is recorded on a DVD-RAM or DVD-RW
disc in VR mode, all audio channels of the receiving programme
are recorded on the disc. When you record a programme on a
DVD-R or DVD-RW disc in video mode, select the desired audio
channel (from among “NICAM 1/MAIN”, “NICAM 2/SUB”,
“MONO”) to be recorded on the disc. (
੬ pg. 89)
NOTE:
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Audio Channel Selection” on
page 30.
Type of Broadcast Being
Received
On-screen Display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
DR-M10SAG_AX_AA2_01.book Page 49 Thursday, May 6, 2004 10:46 AM