Filename [DR-M10AG_AX_AA2_08Recording.fm]
Masterpage:Left+
50 EN
Page 50 April 27, 2004 11:03 am
RECORDING (cont.)
Free Rate Function
To record the entire programme, the unit automatically set the
appropriate recording speed depending on the combination of
the total time of the programme to be recorded and either the
remaining disc space or the specified recording time (from 60
minutes to 480 minutes).
To record the entire programme within the actual
remaining disc space
Select “FR (JUST)” in a recording speed selection procedure.
(
੬ pg. 53, 55)
● Note that this function is available only for timer programming
recording.
To record the entire programme by specifying the
desired recording time
Select “FR60–FR360”, “FR420” or “FR480” in a recording speed
selection procedure. (
੬ pg. 47, 53, 55)
To record a 25-min. long daily programme five times just
on a same disc for example
Perform “G-CODE
TM
/SHOWVIEW
TM
Timer Programming” (੬ pg. 52)
procedure. Be sure to set the recording speed to “FR125” and set
Weekly/Daily Rec Function to “MON–FRI” in step E to fit the
total recording time to the whole disc space.
When the same programme is recorded in SP mode instead of in
“FR125”, the 5th programme cannot be recorded.
NOTES:
● You can programme this unit to timer-record, regar