Filter
Top Products
Filename [DR-M10AG_AX_AA2_08Recording.fm]
Masterpage:Left+
56 EN
Page 56 April 27, 2004 11:03 am
TIMER RECORDING (cont.)
On-Disc Timer
Programming
On-Disc Timer Programming is a function used with discs that
are especially intended for a specific programme. The disc is
then programmed for a programme you always watch every day
or every week. Since older programs are automatically
overwritten, a single DVD-RAM/RW (VR mode) disc can be used
without worrying about how much recording capacity remains.
(
੬ pg. 58, “How discs are overwritten”)
You can programme each disc to timer-record as many as
8 programmes.
To make the disc for On-Disc Timer
Programming
A
Load a disc.
A Press x to open the disc tray.
B Place a recordable disc on the disc tray.
● For details, refer to “Placing a Disc” (੬ pg. 9).
C Press x to close the disc tray.
B
Access Programme Check screen.
Press PROG/CHECK.
C
Access the programme screen.
When On-Disc Timer Programming is made for the first
time on the disc
Press rt repeatedly to select “DISC TIMER PRGM”,
then press ENTER.
● When some programmes are recorded on the disc, a caution
message appears. In such a case, backup the programmes as
required, then format the disc before making On-Disc Timer
Programming. (
੬ pg. 97, “Format A Disc”)
When On-Disc Timer Programming has already been
made on the disc
Press rt repeatedly to select “NEW TIMER
PROGRAMME”, then press ENTER.
D
Enter the recording date.
Press rt repeatedly to set the desired date.
● The current date appears on the TV screen. The date you enter
appears in its place.
E
Enter the recording start time.
Press we to select “START”, then press rt repeatedly
to set the desired start time.
● Each press of rt advances/goes back the start time in 1-min.
increments.
● To advance/go back the start time in 30-min. increments, press
and hold rt.
Before performing On-Disc Timer Programming:
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
●
Make sure that the unit’s built-in clock is set properly.
A
TTENTION:
If data is recorded on a disc for On-Disc Timer Programming
using a unit from another manufacturer, On-Disc Timer
Programming may no longer function properly.
DVDTV
DVD
TIMER
PROG/CHECK
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY
ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
STANDBY/ON
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL
MEMO/MARK
DEF
CH
REC LINK
G-CODE
SHOW VIEW
TV
TV
MUTING
TV/
VIDEO
TV VOLUME
rtwe
ENTER
DVD1
PROG/CHECK
x
DVDTV
DR-M10SAG_AX_AA2_01.book Page 56 Thursday, May 6, 2004 10:46 AM