Filter
Top Products
H EN
36
Setting Receiving
Channels
A Access the setup menu.
B Select “INITIAL SET UP”.
C Select “TUNER SET”.
D Select “MANUAL CH SET”.
0 The AMANUAL CH SETB screen will be
displayed.
E Select “EDIT”.
F Select a channel that you want to set.
0 A confirmation screen will be displayed.
G Set the channel.
A Select and confirm on ABANDB.
0 ACHB is a regular broadcast band, and ACCB is
a cable broadcast band.
B Select and confirm on ACHB.
0 Select a receiving channel.
C Select and confirm on AIDB.
0 Select from the ATV Station and ID ListB
[ P104].
0 See AEntering the Station IDB [ P37].
D Select and confirm on AFINEB.
0 If the reception is poor, press the Selection
Keys (FG) to fine-tune.
E Select and confirm on ADECODERB.
0 When a decoder is connected, set to AONB.
0 Unable to change the setting other than the
following.
Setup Menu AL-2 SELECTB = ADECODERB
[ P103] k
H Exit setup.
0 If RETURN is pressed, you will return to the
previous screen, and other channels can also be
set.
9Usually performed automatically using auto
setup or preset download. If cannot be set
automatically in some regions, set them
manually.
.
........................................................
.
IMPORTANT:
0 If channel settings are performed manually, the
VIDEO Plus+ guide channel will not be set. See
AVIDEO Plus+ Guide Channel SetB [ P38].
RETURN
A, H
B - G
F
F - H
G
SELECT
CONFIRM
MANUAL CH SET
SELECT
CONFIRM
EDIT
SELECT
CONFIRM
----
BAND
CH
ID
FINE
DECODER
CH
2
OFF
RETURN
DR-MH300SE.book Page 36 Thursday, November 24, 2005 9:12 AM