Filter
Top Products
H EN
92
Sound
Sound settings
(HDD, DVD-RAM/-RW(VR)/-R(VR))
This unit can receive NICAM programmes.
.
......................................................................................................................
IMPORTANT:
0 If receiving NICAM, set Setup Menu AAUDIO RECB = ANICAMB [ P101] W
0 For NICAM Bilingual broadcast, NICAM FM Sound will be output when the following setting is set. Setup Menu
AAUDIO RECB = AMONOB [ P101] W
0 If connected via digital audio, set Setup Menu ADIGITAL AUDIO OUTB = APCM ONLYB [ P98] D. Otherwise,
the audio cannot be switched.
0 DVD-RW/-R (Video mode) disc does not support bilingual sound. When recording or dubbing to these discs, set the
recording sound in advance. Setup Menu AVIDEO MODE RECORDING AUDIOB [ P100] N
0 When stereo or monaural programmes are recorded or dubbed on DVD-RAM or DVD-RW/-R (VR mode) discs, the
display shown will be .
Relationship between disc type and sound output
Setup Menu ADIGITAL AUDIO OUTB [ P98] D
Programme type On-screen display and sound output
Regular Monaural
Normal monaural sound
NICAM STEREO
NICAM stereo sound
NICAM Bilingual
NICAM main audio NICAM sub audio
NICAM Main+Sub audio NICAM FM Sound
0 Switches each time AUDIO is pressed. (Excluding NICAM FM Sound.)
NICAM Monaural
NICAM monaural sound
External Source
Stereo Left audio Right audio
0 Switches each time AUDIO is pressed.
Disc playback
media
Sound format
DIGITAL AUDIO OUT setting
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
DVD Video
48/96 kHz 16/
20/24 bit
Linear PCM
48 kHz 16 bit Linear PCM
Dolby Digital Dolby Digital Bitstream 48 kHz 16 bit Linear PCM
MPEG MPEG Bitstream 48 kHz 16 bit Linear PCM
DTS
DTS Bitstream (No Output)
Audio CD
DTS
CD-DA
44.1 kHz 16 bit Linear PCM
Video CD, Super Video CD
CD-ROM/R/RW MP3 Linear PCM
DR-MH300SE.book Page 92 Thursday, November 24, 2005 9:12 AM