Filter
Top Products
Troubleshooting
Problem Symptom Action Reference
Page
Power does not turn on The “HELLO” message remains
displayed, and the unit does not start
up.
Press the [RESET] button on the front
panel.
If it does not start up, stop using this unit,
unplug the plug from the outlet, and bring it
to the dealer or Service Center.
(A page 16)
The cooling fan motor is
not working
“FAN LOCKED” is displayed on the
display window of this unit.
The cooling fan motor is spoiled. Stop
using the unit, remove the power plug from
the outlet, and consult the dealer or
Service Center.
-
Power turns off
automatically
The “AUTO POWER (OFF)” setting is
set to “2 HOURS” or “6 HOURS”.
Change the “AUTO POWER (OFF)”
setting of “SETUP” to “OFF”.
(A page 83)
The temperature of this unit has rose,
and operation has ceased for safety
purposes.
Place this unit in an area with ventilation if
possible, and wait approximately 30
minutes for it to cool down.
-
The power turns on
automatically
The “HDMI-CEC” setting is set to
“ON”.
Change the “HDMI-CEC” setting of
“CONNECTION” to “OFF”.
(A page 89)
Input cannot be
switched
i.LINK connection is currently being
established.
Cancel importing, or wait until the
connection ends.
(A page 41)
There are no video
images on the monitor
Monitor only supports RGB input. Set “HDMI --> DVI COLOR” in the setting
menu to “RGB FIX”.
(A page 89)
“HDCP ERROR” is displayed. Use a monitor that supports HDCP. -
Video images may be distorted during
reencoding/dubbing when the monitor
(TV) is connected to this unit using an
HDMI cable, or when the screen
resolution is set to “1080p”.
This is not a malfunction. Change the
“HDMI OUTPUT RESOLUTION” to a value
other than “1080p” (e.g., 1080i) if you find
it annoying.
(A page 89)
Screen is distorted Video images may be distorted during
reencoding/dubbing when the monitor
(TV) is connected to this unit using an
HDMI cable, or when the screen
resolution is set to “1080p”.
This is not a malfunction. Change the
“HDMI OUTPUT RESOLUTION” to a value
other than “1080p” (e.g., 1080i) if you find
it annoying.
(A page 27)
There is no audio sound The “HDMI AUDIO OUTPUT” setting
is set to “OFF”.
Change the “HDMI AUDIO OUTPUT”
setting of “CONNECTION” to “ON”.
(A page 89)
The amplifier does not support
“BITSTREAM” output.
Use an amplifier that supports bitstream
output.
(A page 87)
Dubbing cannot be
performed
The title to be dubbed is copyright
protected.
Titles that are copyright-protected cannot
be dubbed. Select a title that is not
copyright-protected.
(A page 27)
A finalized disc has been inserted. Insert a disc that has not been finalized. -
The disc is not formatted. Format the disc. (A page 28)
The SD card is write-protected. Remove the SD card and remove the write
protect lock.
(A page 30)
Others
109