Filter
Top Products
v
HDMI OUTPUT RESOLUTION
Setting Values Description
AUTO Automatically selects an appropriate
resolution according to the connected
device.
480p (NTSC)
576p (PAL)
Fixes the resolution at 480p or 576p.
1080i Fixes the resolution at 1080i.
720p Fixes the resolution at 720p.
1080p Fixes the resolution at 1080p.
Memo:
v
When the resolution is set to “720p”, videos are output at
“1080i” other than those recorded at “720p” even though
“720p” is shown on the display.
v
Depending on the conditions (monitor type 4:3, resolution
“720p” and above, aspect “16:9”), the on-screen display
from the component output may be cut off.
In this case, set “VIDEO PRIORITY MODE” to
“COMPONENT”.
The on-screen display from the [VIDEO OUT]/[S-VIDEO
OUT] terminal may be cut off when “VIDEO PRIORITY
MODE” is set to “COMPONENT”.
In this case, set “COMPONENT OUTPUT” to “480p”
(NTSC)/“576p” (PAL) or below, or set the monitor type to a
setting other than “16:9”.
v
BD-VIDEO 24p OUT
Setting
Values
Description
OFF Outputs in the resolution set by “HDMI
OUTPUT RESOLUTION”.
ON Outputs 24p elements at 24p.
Memo:
v
24p playback is possible for commercially available BD-
Videos or BDMVs that are recorded in 24p. Content other
than BDMVs that is dubbed or recorded on this unit at 24p,
as well as 24p content on SD cards are played back at 60p
or 60i.
v
This is applicable for BD-ROM and DVD-Video titles.
This is available when connected to a 24p compatible
monitor.
v
Elements other than 24p ones are output at 60p (for NTSC)
or 50p (for PAL).
v
No video images will be output from the [VIDEO OUT], [S-
VIDEO OUT] and [COMPONENT VIDEO OUT] terminals
when the output resolution from the [HDMI] terminal is at
1080/24p.
v
x.v.Color
Setting
Values
Description
AUTO Outputs x.v.Color information with HDMI
when video images that include x.v.Color
information are played back.
OFF Does not output x.v.Color information with
HDMI when video images that include
x.v.Color information are played back.
Memo:
v
This is applicable when an x.v.Color compatible monitor is
connected.
v
Deep Color
Setting
Values
Description
AUTO Set to this value when a “Deep Color” device
is connected.
OFF Set to this value when the video image is
distorted, or colors are unnatural.
v
HDMI RGB OUTPUT RANGE
Setting Values
Description
STANDARD Set to this value for standard uses.
ENHANCED Set to this value when the black and
white parts of the video image are not
distinct.
Memo:
v
This is available when connected to a DVI device that only
supports RGB input.
v
HDMI --> DVI COLOR
Setting
Values
Description
AUTO Value is set automatically according to the
monitor.
RGB FIX Use this setting when video images are not
correctly displayed on the monitor.
Memo:
v
This is available when the “x.v.Color” setting is set to
“OFF”.
When the “x.v.Color” setting is set to “AUTO”, this setting
will be set to “AUTO” automatically.
v
Change this setting when no video image appears while
connected to a DVI device.
v
HDMI AUDIO OUTPUT
Setting
Values
Description
OFF Use this setting if you do not want to send
audio output from the HDMI cable.
ON Use this setting to send audio output from
the HDMI cable.
m
HDMI-CEC
For setting the HDMI-CEC operation from the connected
device.
Setting Values
Description
OFF Disables HDMI-CEC.
ON Enables HDMI-CEC.
Settings Menu
89