Filter
Top Products
Basic operations
16
Basic operations
7 Press ENTER.
The pull-down menu of the “DIGITAL AUDIO
OUTPUT” appears.
DIGITAL AUDIO OUTPUT selection
8 Use 5/∞ to select a desired digital output
signal type.
You must set this item correctly when you connect
the unit to an external surround decoder or D/A
convertor (including an amplifier/receiver with
built-in surround decoder or D/A convertor).
(If you do not connect the unit to such a device, you
do not have to set this item.)
• When connecting with a Dolby Digital decoder,
select “DOLBY DIGITAL/PCM.”
• When connecting with a DTS or MPEG
Multichannel decoder, select “STREAM/PCM.”
• When connecting with other digital devices,
select “PCM ONLY.”
See page 64 for details.
9 Press ENTER.
The TV screen returns to show the opening display.
NOTES
• This setting may not be necessary except when turning
on the power after purchasing the unit.
• You can also set these items, as well as other
preferences, by pressing CHOICE briefly to bring up the
preference display. See “Changing the initial settings”
on and after page 60 for details.
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
DIGITAL AUDIO OUTPUT
DOLBY DIGITAL/PCM
ANALOG OUT
DOLBY PROLOGIC
D. RANGE COMPRESSION
ON
DVD PLAYER SET UP
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM