Filter
Top Products
Advanced operations
47
Advanced
operations
English
Menu bar functions for DVD AUDIO
Selected Icon Operation Note
1
Time mode selection
(During playback only)
Selects the time mode shown in
the display window on the front
panel and in the status bar.
Press ENTER to select the time mode among the
following.
TIME REM TOTAL T.REM Return to initial
• TIME: Current track elapsed time
• REM: Current track remaining time
• TOTAL: Current group elapsed time
• T.REM: Current group remaining time
• If the disc has only one group and
one track, “TOTAL” and “TIME” show
the same value.
2
Repeat mode
(During playback only)
Select the repeat mode.
1 Press ENTER to open the pull-down window.
2Use 5/∞ to select the repeat mode among the
following.
TRACK j GROUP j ALL j A-B j OFF
• TRACK: Current Track repeat
• GROUP: Current group repeat
• ALL: Repeats all the available discs
• A-B: Repeats a desired part (A-B repeat)
3 Press ENTER to make the selected repeat
function active.
(See pages 37 to 39 for details about repeat function.)
• If you select “OFF” during repeat
playback, the unit continues playback
without repeating.
• For the subsequent operations for the
A-B repeat, see page 38.
•“A-B” is not shown in stop mode.
3
Time search
Specifies the elapsed time from the
beginning of the current group,
from which the unit starts
playback.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired time.
3 Press ENTER to play back from the specified
time.
(See page 31 for details about time search function.)
4
Track search
Specifies a desired track to be
played back from.
1 Press ENTER to open the pull-down window.
2 Use numeric buttons to enter a desired track
number.
• For example of entering “12,” press “1” then “2.”
3 Press ENTER to play back from the specified
track.
• When the track number is incorrect:
Overwrite the incorrect number with the correct
number.
• The “10” and “+10” buttons are not
used in this function.
• You can also locate a desired track
directly by specifying the track
number using the numeric buttons
during playback. See page 25.
5
Program
(While stopped only)
Specifies the playback order of
tracks.
1 Press ENTER to bring up the program table.
2 Specify tracks in the desired order using the
numeric buttons.
3Press 3 to start program playback.
(See page 35 for details about program playback.)
6
Random
(While stopped only)
Activates random playback.
1 Press ENTER to activate random playback.
(See page 36 for details about random playback.)
1/3 PAGE 32/32OFF
8.5Mbps
GROUP 3
TOTAL 1:25:58
TRACK 33
TRACK
PROG. RND.
DISC 1
2
1
3
4
5
6
7
8
Menu icons
The following table shows the menu bar
functions available for DVD AUDIO.
Note that, in the description of the
operation column, we assume the
associated icon is selected.
TRACK
PROG.
RND.