Filter
Top Products
Advanced operations
34
Advanced
operations
Some DVD AUDIO discs contain a special group called
“bonus group” whose contents are not opened to the
public. The bonus group is always assigned to the last
group of a disc (for example, if a disc contains four
groups including a bonus group, “group 4” is the bonus
group).
To play back a bonus group, you have to enter the
specific “key number” (a kind of password) for the
bonus group. A way of getting the key number depends
on discs.
After getting the key number, you can play back the
bonus group by the following procedure.
¶ While a disc containing a bonus group is stopped
1 Use the numeric buttons to select the bonus
group number (the last group).
The display window and on-screen display prompt
you to enter the key number as shown below.
2 Use the numeric buttons (0 to 9) to enter the
key number.
If you enter the key number correctly, the unit starts
playback of the bonus group.
If you enter a wrong key number, the unit does not
start playback and the display window and TV
screen again prompt you to re-enter the key
number.
3 Press ENTER.
To play back a bonus group of a DVD
AUDIO disc
Available :
TV2
2
TV1
1
TV3
3
TV5
5
TV4
4
TV6
6
TV8
8
TV7
7
TV9
9
TV0
0
TV-/--
10
MUTING
+10
TV/VIDEO
CANCEL
TITLE/
GROUP
RETURN
VFPAUDIOSUB TITLEREPEAT
ANGLEDIGEST
3D
PHONIC
ZOOM
AMP VOL
PROGRESSIVE
SCAN
fs/Rate
RM-SXV016J
REMOTE CONTROL
OPEN/
CLOSE
DISC
SELECT
TV DVD
NEXTPREVIOUS
SELECT STROBECLEAR
SLOW
-
SLOW+
VOL
-
VOL+
CH
+
CH
-
T
O
P
M
E
N
U
M
E
N
U
O
N
S
C
R
E
E
N
C
H
O
I
C
E
ENTER
STANDBY/ON
TV DVD
PAGE
Numeric
buttons
(TV screen)
KEY _ _ _ _
(Display Window)
NOTE
• Once you enter the correct key number, the unit
memorizes it until you turn off the power or open the
carousel.
• If you specify a track in the bonus group when
programming tracks for the program playback, the
display window will also show the above display for
inquiring the key number.
• In the random playback mode, tracks in the bonus
group are not played back.
• To turn off the key number entry display, operate any
one of the following.
*Press
7 .
* Open the disc tray carousel.
* Change the current disc.
* Turn the power off.
Opening the carousel or turning the power off also
erases the memory of the key number, while pressing
7
does not erase the memory.