Filter
Top Products
Changing the initial settings
65
Changing the
initial settings
English
Menu items Setting options Notes/examples
ANALOG OUT
To play back a DVD VIDEO disc
recorded with surround
multichannel audio correctly, this
setting must be properly made
according to your audio system.
• 2-CH DOLBY SURROUND
Should be selected when you enjoy
multichannel surround audio by
connecting the unit’s AUDIO OUT
jacks to a surround decoder.
• This function does not work when
the 3D PHONIC function is activated
(see page 44).
•“2-CH DOLBY SURROUND” and
“2-CH STEREO” settings affect only
the output signal from the AUDIO
OUT jacks when playing back a DVD
VIDEO disc recorded with surround
multichannel audio.
• Some DVD AUDIO discs prohibit the
2-channel down-mix. For such a disc,
you cannot get the down-mixed
signal even if you set “ANALOG
OUT” to “2-DOLBY SURROUND” or
“2-CH STEREO.”
• 2-CH STEREO
Should be selected when you enjoy
conventional 2-channel stereo
audio by connecting the unit’s
AUDIO OUT jacks to a stereo
amplifier/receiver or television set,
or when you duplicate audio of a
DVD VIDEO disc recorded with
surround audio to your MD,
cassette, etc.
• MULTI CHANNEL
When you enjoy multichannel
surround audio by connecting the
unit’s 5.1-channel audio outputs to
an amplifier equipped with 5.1-
channel inputs.
D. RANGE COMPRESSION
When enjoying a DVD VIDEO disc
recorded with the Dolby Digital
format at low or middle volume,
this setting makes you hear sound
comfortably.
• AUTO
Audio is played back with the
dynamic range compressed.
• This function works only when
playing back a disc recorded with
Dolby Digital. The setting is not
effective for other discs.
• This function does not work when
the 3D PHONIC function is activated
(see page 44).
• ON
Audio is always played back with
the dynamic range compressed.