Filter
Top Products
122
Main menu - Settings
FEC
Select the applicable error rate (Viterbi rate). You need not state the error rate for the DVB S(SD) transponders.
Instead a xed display of “Automatic” appears. You must state the correct error rate for the DVB S2(HD) transponders.
Either QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5, 5/6, 8/9 or 9/10.
Polarization
Select the correct polarization (horizontal or vertical).
Symbol Rate
Use the numeric keypad to enter the related symbol rate.
Tuner Conguration
Since the tuner conguration is very detailed, we have dedicated it a chapter all to itself. For this see the chapter
“Tuner Conguration”.
After calling up the menu you will see the following
display:
The individual items are selected using the
buttons. If you require to access submenus, they can be
called up using the
button. Changes to the current
settings can be made using the
buttons or the
numeric keypad.
Edit Satellites
Satellite Name
Select here the satellite that you want to edit/delete,
or whose name you want to change. By pressing
the
button at this point you can view a list of the
satellites saved in the receiver. Use the
buttons to
select the satellite you want and conrm your selection
with the
button.
The settings of the satellites should be performed by a specialist engineer for the respective
reception system. Only make these settings yourself if you are fully familiar with the particulars of
your reception system.