Filter
Top Products
25
Connection and setup
The following display appears:
Motor Control
Select the control type “DiSEqC™1.2”. Refer to the
documentation for your motorized antenna for details.
Go to Null Position
Select the “Go to Null Position” eld. Press the
button
to instruct the turntable to move to its null position.
Set Borders
Select the “Set Borders” eld. In this menu you can set the
limits for your turntable. This is particularly necessary if the
turntable has only a restricted range in which it can turn
before striking an obstruction (such as a wall or tree).
Press the
button. The following display appears:
The following buttons allow you to control the movement
of the turntable:
Start slow rotation to the West
Rotate to the West step by step
Stop the current movement
Rotate to the East step by step
Start slow rotation to the East
Once you have reached the desired East/West limit, switch to the respective field “Set current position for “****” border”
and press the
button to conrm.
If you subsequently want to delete the Set Borders, switch to the “Reset border positions” field and press the
button
to conrm deletion of the limits. You can then set new values for the limits. Once you have set all the limits, press the
button.
Press the
(green) button to move to the next menu.
Motorized Antenna (DiSEqC™1.2)