Filter
Top Products
127
Add a new transponder
By pressing the
button you can call up the input
screen to save a new transponder. The following display
appears:
Frequency:
Use the keypad to enter the transmission frequency for
the new transponder.
DVB Type:
Select here whether the selected transponder is to
receive standard channels (DVB-S (SD)) or HDTV
channels (DVB-S2 (HD)).
Error rate:
FEC
Select the applicable error rate (Viterbi rate). You need not state the error rate for the DVB S(SD) transponders.
Instead a xed display of “Automatic” appears. You must state the correct error rate for the DVB S2(HD) transponders.
Either QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5, 5/6, 8/9 or 9/10.
Polarization:
Select here the applicable polarization for the selected transponder. Either “Horizontal” or “Vertical”.
Symbol Rate:
Use the numeric keypad to enter the related symbol rate.
When all settings have been made, press the
button to save the new transponder.
Delete transponder
Press the
button to delete the currently selected
transponder. As a security feature you are asked to conrm
again by pressing the
button that you really want to
delete the transponder.
Main menu - Settings