Filter
Top Products
67
Information on direct decryption using timers (recordings on encrypted channels):
The “Decrypt” eld only appears when recording encrypted channels. If you want to make the recording unencrypted,
use the
buttons to select “Yes”; if you want the recording to be made encrypted on the hard disk, select the
“No” option. When doing this, note the following:
If two timers are set for encrypted channels, both with decryption set to “On”, and the
recording times overlap, it can happen that the rst timer will record decrypted and the second
timer will record encrypted. More details can be found under “Mainmenu”, “Interfaces”,
“Common Interface”.
Programme not in EPG:
Select any programme on the channel on which the
desired programme is to be broadcast at a later date,
and press the (red dot) button. The following display
appears (example):
As there is no EPG data, you must enter the data (date,
start, end) manually. Enter the data using the cursor
buttons (
) or numeric keypad. Press the
button to
save your settings.
Premium EPG
Setting the storage location for recordings
In the recording settings, press the
buttons
to select the “Target” eld and then press the
button. The following display appears (example):
As described in the “Recording archive” chapter, it is possible to create folders for your recordings and to store
them in these folders. If folders have already been created for recordings, you have the option of specifying a folder
as the destination when scheduling recordings in the EPG. It makes no difference which recording mode you choose
after selecting the folder (e.g. for a series recording, all subsequent recordings of the programme will be stored in
the folder you have selected). The procedure is as follows:
Now use the
buttons to select the desired folder or select “To Recording Archive record” and then press the
button.