Filter
Top Products
15
Connection and setup
The following display appears:
Use the
buttons here to select the basic settings for the video and audio output from the receiver to the TV set.
For this, refer to the operating manual for your TV set and take care to select only those settings that your TV set
can process.
Video Output via
Select the connection on the receiver to which you have connected your television. Either
HDMI/YUV format
Here you can select the picture resolution that will be sent
to your TV set. Either
- 1080i (resolution 1920 x 1080, half-screen images)
- 576p (resolution 720 x 576, full-screen images) or
- 720p (resolution 1280 x 720, full-screen images)
Show 4:3 Event
Here you can select the type of screen display mode for
4:3 broadcasts on a 16:9 TV set:
- Normal (Pillarbox)
- Stretched (Full Screen) or
- Zoomed in (Pan & Scan)
TV aspect ratio
Select the TV's picture format. Either
- 4:3 or
- 16:9
Picture format
Select the type of screen display, depending on your
setting for the TV format:
- TV format “4:3”: Pan & Scan or Letterbox
- TV format “16:9”: Always 16:9 or automatic
HDMI/YUV
SCART
~
~
~
or