Filter
Top Products
126
Main menu - Settings
Symbol Rate
The symbol rate is positively assigned to each saved
transponder, and cannot be changed.
Polarization
The polarization is positively assigned to each saved
transponder, and cannot be changed.
Edit transponders
By pressing the
button you can call up the input
screen which allows you to edit/change the settings of
the previously selected transponder.
Frequency:
Here you are shown the selected transponder to be
edited. The transponder frequency cannot be changed.
DVB Type:
Select here whether the selected transponder is to
receive standard channels (DVB-S (SD)) or HDTV
channels (DVB-S2 (HD)).
Error rate:
You only need to input the error rate if this is a transponder for reception of HDTV channels (DVB-S2 (HD)). You
can choose between the following error rates: QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3, 3/4, 3/5,
5/6, 8/9 or 9/10.
Polarization:
Select here the applicable polarization for the selected transponder. Either “Horizontal” or “Vertical”.
Symbol Rate:
Use the numeric keypad to enter the related symbol rate.
When all settings have been made, press the
button to save the changes.