Filter
Top Products
153
Tuner Conguration
The following display appears:
You can choose from the following LNB types:
- Universal
- Wideband
- User-dened
If your LNB is neither a Universal nor a Wideband LNB,
select the setting “User-dened”. The “User-dened”
setting means you must manually set the frequency
ranges that are congured for your LNB. Select the
frequency range to be changed and set the values
that are correct for your LNB, using the
buttons or the numeric keypad. When you have completed all settings,
press the
button.
Satellite and position:
Select the “Satellite and Position” eld and select here the satellite you desire from the available satellites. By pressing
the
button at this point you can view a list of the satellites saved in the receiver. Use the
buttons to select the
satellite you want and conrm your selection with the
button.
Test-Transponder:
Select the “Test Transponder” eld. Here you can select a transponder for checking whether your settings are correct
using the signal strength bar and signal quality bar.
When all settings have been made, press the
button to exit the menu.
If you previously selected two satellites under “Number of Satellites”, you must now make these settings for the
second satellite. Switch to the “Satellite 2:***” eld and make the settings in the same way as for the rst satellite.
When all settings have been made, press the
button to exit the menu.