Filter
Top Products
96
Note:
When the chapter view is called up, the receiver
automatically creates seven chapters for the recording
you select, if this has not already been done. This function
is not performed if you have already created chapters
manually.
Use the
buttons to select the desired chapter.
To start playback from the selected chapter, press the
button. During playback you can press the
(red)
button to display the chapter view again, and if desired
use the
buttons to select another chapter. This
is called up by pressing the
button (see example
screenshot on the right).
Chapter view
Recording archive (play back/edit recordings)
The chapter view for a recording is called up using the
(red) button in the recording archive. The following
display appears (see example screenshot on the right):
Start block selection
Use the
buttons to select “Start Blockselection”
and conrm your selection with the
button. You can
now use the
buttons to start block selection in the
previously selected recordings. This selects the recordings
in the sequence in which they appear in the previously
selected sort list and applies a coloured background to
them (see example screenshot on the right):
Then press the
(red dot) button. You can now perform the “Delete”, “Lock” and “Change category” edit options
for all selected recordings as for an individual selected recording Use the
buttons to select the desired edit
option and conrm your selection using the
button. You can nd an explanation of the individual edit options under
“Edit recordings” in this chapter.