Filter
Top Products
55
One-Touch Recording (OTR)
Basic operation in TV or Radio mode (live operation)
To start recording directly to the hard disk, press the
(red dot) button. The following display appears
(example):
Use the
buttons to select the lines to be changed; make the changes using the
buttons.
Recording:
You have the following selection options:
- “From start”: Recording is performed from the time since when the current channel has been watched without
interruption (option available only if automatic timeshift is activated)
- “From now”: Recording is performed from the present time
- “Later” Recording begins at the start time entered in the “Start” line
Start:
You only need to enter the start time for a recording if you have selected the recording type “Later”.
End:
The end of the recording is determined automatically by the receiver, based on the available EPG data. If you want you
can however change this manually.
Duration:
The duration of a recording is determined automatically by the receiver, based on the start and nish times. You can
however correct the duration manually. In this case the receiver automatically adjusts the end time to correspond to the new
recording duration. The start time of the recording remains unchanged.
Decrypt:
Here you can select whether the programme should be recorded unencrypted (select “Yes”) or encrypted (select “No”)
on the hard disk.
Selecting “On” means that, depending on the setting in the “System parameters” “Common Interface” “Multiple
decoding” menu, you may not be able to view any other encrypted channels that use the same CA module for decoding
(see Chapters “System parameters” “Common Interface” “Multiple decoding”).
Press the
button to start the recording - you can cancel it by pressing the
or the
(red dot) button. To cancel
the recording after it has started, you must press the
button, use the
buttons to select the recording to be
cancelled and press the
button to conrm the action.